Q1: NAK80 vs. P20: How do they compare, and when should you choose each?
Both are pre-hardened plastic mold steel plates supplied ready for direct CNC machining without post-heat treatment risk, but they cater to different mold life and surface finish tiers:
P20 (Standard Pre-Hardened Mold Steel):
Advantages: Economical initial plate cost and excellent machinability. Pre-hardened to 28–32 HRC, making it the industry standard for general-purpose plastic mold bases, core/cavity plates, and non-critical cosmetic parts.
Limitations: Lower hardness and moderate polishability; less resistant to surface wear and scratching over long production runs.
NAK80 (Premium Precipitation-Hardening Steel):
Advantages: Supplied at a higher pre-hardened state (37–43 HRC) with ultra-uniform microstructure, delivering exceptional mirror polishability (SPI A2/A1), fine EDM texturing response, and effortless weld repairs.
Best Choice: Choose P20 for standard commodity plastic molds, large structural mold bases, or low-to-medium volume production on a budget. Choose NAK80 for high-precision electronic housings, clear/transparent plastic parts, high-end automotive interior components, or molds requiring high mirror polish without heat-treatment risk.
Q2: NAK80 vs. 1.2083: How do they compare, and when should you choose each?
This comparison contrasts a pre-hardened high-polish steel plate with a fully heat-treatable stainless mold steel plate:
1.2083 (DIN Martensitic Stainless Mold Steel):
Advantages: Contains 13% chromium, hardened via vacuum heat treatment to 48–52 HRC. Offers excellent corrosion/rust resistance against corrosive polymers (e.g., PVC or flame-retardant resins) and good surface wear resistance.
Limitations: Requires post-machining heat treatment (adding lead time and thermal distortion risks) and demands specialized polishing techniques due to carbide structure.
NAK80 (Pre-Hardened High-Polish Steel):
Advantages: Ready for immediate CNC machining and polishing at 37–43 HRC with zero heat-treatment distortion risk. Provides superior polishing ease and EDM texturing consistency.
Best Choice: Choose 1.2083 when molding corrosive resins, operating in humid clean-room environments, or requiring high cavity hardness above 48 HRC. Choose NAK80 for non-corrosive engineering plastics requiring high-aesthetic mirror surfaces, complex fine details, and rapid mold delivery.
Q3: Why choose 6-side precision pre-milled NAK80 plates over raw mill plates?
NAK80 plates are specifically valued for high-precision machining and optical-grade polishing. Selecting 6-side precision pre-milled NAK80 plates ensures maximum efficiency and surface quality:
Complete Removal of Mill Scale & Surface Flaws: Raw hot-rolled mill plates carry surface oxidation, micro-flaws, and non-uniform outer layers. Pre-milled plates completely eliminate these flaws, ensuring you machine directly into sound, homogenous core steel.
Bypass Heavy Roughing & Shorten Lead Time: Plates arrive squared and pre-milled to exact target dimensions. Your shop can bypass time-consuming rough face-milling and proceed straight to precision CNC finishing, wire EDM, or mirror polishing.
Strict Tolerances for Instant Clamping: Delivered with tight thickness, width, and squareness tolerances, allowing immediate, secure clamping in precision vises or fixtures without manual alignment.
Lower Total Job Cost & Dimensional Stability: Pre-milling relieves surface stresses prior to fine cavity milling, preventing plate warping and movement while cutting machine spindle hours, cutter wear, and skilled labor costs.
Age-Hardened NAK80 (37–43 HRC) Precision Machined Plastic Mold Steel Plate Pre-hardened high-performance plastic mold steel supplied ready for direct CNC machining without additional heat treatment. Delivered 6-face pre-milled with uniform hardness. Key Advantages & Capabilities
No Heat Treatment Needed: Eliminates risk of quench distortion.
6-Face Milled Stock: Squared and cleaned for immediate CNC setups.
Uniform Hardness: Consistent 37–43 HRC from surface to core. 💡 Optional On-Demand Machining & Wire-EDM Services
5-Axis Milling: High-speed pre-milling for electronic component cavities.
EDM Electrode Machining: Precision spark-erosion preparation.
Custom Slicing: Saw cutting to exact target block dimensions. Technical Specifications
Grades: NAK80 (Pre-Hardened Plastic Steel)
Condition: Pre-Hardened (37–43 HRC) | 6-Face Milled
Applications: Electronic component molds, clear plastic housings, automotive interiors.
📩 Upload your CAD drawings or dimensional requirements for a 2-hour quote.







Reviews
There are no reviews yet.