Contact Us Now!
This field is required.
This field is required.

718H Pre-Hardened Steel Plate, Precision 6-Face Milled Precision CNC Machining & Wholesale Supply

Steel Grade / Brand

718H / DIN 1.2738 / AISI P20+Ni (GB 3Cr2NiMo)

Primary Applications

Large plastic injection molds, automotive bumper molds, TV cabinet molds

Product Form

Plate & Block

Custom-Machined Steel

Made to Your Drawings — Material and Precision Machining Included.

Precision Machining

6-Face Precision Milling; Total Machining Allowance: 0.10–0.31 mm, Subject to Drawing Requirements.

Minimum Order Quantity(MOQ)

1 Piece — Start with a Small Order to Evaluate Our Quality and Service Before Committing to Larger Purchases.

Lead Time & Shipping

Preparation Time: 3–5 Days After All Order Details Are Confirmed. Shipping Options: Sea Freight, Air Freight, or Express Courier. Transit Time Depends on the Selected Shipping Method and Destination.

Hardness

Pre-hardened (33–38 HRC / 300–355 HBW)

Key Composition

C: 0.35–0.45%, Cr: 1.8–2.1%, Ni: 0.9–1.2%, Mo: 0.2–0.4%

Q1: 718H vs. NAK80: How do they compare, and when should you choose each?

Both are pre-hardened plastic mold steel plates supplied ready for direct machining without post-heat treatment risk, but they cater to different core size and finishing priorities:

  • 718H (Pre-Hardened Vacuum-Degassed Steel):

    • Advantages: Pre-hardened to 33–38 HRC with superior core-to-surface hardness uniformity across large cross-section plates. Excellent for medium-to-large plastic injection molds requiring structural stability and good polishability.

    • Limitations: Slightly lower hardness and polishability refinement compared to high-purity precipitation-hardened grades.

  • NAK80 (Pre-Hardened Precipitation-Hardening Steel):

    • Advantages: Supplied at a higher pre-hardened state (37–43 HRC) with ultra-uniform structure, enabling exceptional mirror polishability (SPI A2/A1), fine EDM texturing, and effortless weld repairs.

    • Best Choice: Choose 718H for medium-to-large mold cores, automotive interior panels, home appliance housings, or structural mold plates with standard polish requirements. Choose NAK80 for high-precision electronics, clear plastic housings, or complex cosmetic components requiring an outstanding surface finish without post-heat treatment.

Q2: 718H vs. UNIMAX: How do they compare, and when should you choose each?

This comparison highlights the transition from a standard pre-hardened mold steel plate to a premium, high-hardness matrix tool steel plate:

  • 718H (Pre-Hardened Mold Steel):

    • Advantages: Economical material cost, delivered pre-hardened at 33–38 HRC, eliminating heat treatment lead times and distortion risks. Ideal for standard production runs.

    • Limitations: Lower compressive strength and wear resistance under extreme clamping forces or highly abrasive resins.

  • UNIMAX (Premium High-Hardness Matrix Steel):

    • Advantages: Heat-treated to a high working hardness (54–58 HRC) with exceptional impact toughness, high compressive strength, and resistance to thermal shock and abrasive wear.

    • Best Choice: Choose 718H for general-purpose plastic injection molds, non-abrasive resins, or large mold bases where direct CNC machining and cost efficiency are key. Choose UNIMAX for severe abrasive environments (e.g., glass-fiber reinforced resins like PA+GF), extreme clamping loads, or ultra-high-volume long-life production runs.

Q3: Why choose 6-side precision pre-milled 718H plates over raw mill plates?

Pre-hardened steel plates like 718H are designed for direct precision machining. Selecting 6-side precision pre-milled 718H plates maximizes shop efficiency and accuracy:

  • Complete Removal of Mill Scale & Surface Flaws: Raw hot-rolled or forged mill plates carry surface oxidation, micro-cracks, and non-uniform outer layers. Pre-milled plates completely remove these flaws, ensuring you machine directly into sound, homogenous core steel.

  • Bypass Heavy Roughing & Cut Lead Time: Plates arrive squared and pre-milled to exact target dimensions. Your machine shop can skip time-consuming rough face-milling and proceed straight to precision CNC finishing, wire EDM, or polishing.

  • Strict Tolerances for Instant Setup: Delivered with tight thickness, width, and squareness tolerances, allowing immediate, secure clamping in precision vises or fixtures without manual alignment.

  • Lower Total Production Cost: Pre-milling relieves surface stresses prior to fine machining, preventing plate movement and warping during deep cavity milling while saving spindle hours, cutter wear, and labor costs.

Pre-Hardened 718H (32–38 HRC) Nickel-Alloyed 6-Face Milled Mold Steel Plate Nickel-added pre-hardened mold steel ensuring superior core-to-surface hardness uniformity. Delivered 6-face precision milled for large plastic injection molds. Key Advantages & Capabilities

  • Uniform Through-Hardness: No soft spots even in massive thick plates.

  • 6-Face Precision Milled: Cleaned faces ready for deep CNC pocketing.

  • Etching & Texturing Friendly: Superior response to chemical graining. 💡 Optional On-Demand Machining & Wire-EDM Services

  • Large-Block CNC Milling: Heavy roughing for large automotive molds.

  • Deep Water Channel Drilling: Multi-axis cooling line creation.

  • Sizing & Squaring: Precision flame cut or saw cut to size.

  • Technical Specifications

  • Grades: 718H | DIN 1.2738 | P20+Ni

  • Condition: Pre-Hardened (32–38 HRC) | 6-Face Milled Finish

  • Applications: Automotive bumpers, dashboard molds, large appliance housings.

  • 📩 Upload your CAD drawings or dimensional requirements for a 2-hour quote.

 

8aa6b1e02ba92a5974f6f8f6575b5ed1 1 IMG 2979 1 6f3f10238e6bbcadb63720d6fae73d4a 1

Steel Grade / Brand

718H / DIN 1.2738 / AISI P20+Ni (GB 3Cr2NiMo)

Primary Applications

Large plastic injection molds, automotive bumper molds, TV cabinet molds

Product Form

Plate & Block

Custom-Machined Steel

Made to Your Drawings — Material and Precision Machining Included.

Precision Machining

6-Face Precision Milling; Total Machining Allowance: 0.10–0.31 mm, Subject to Drawing Requirements.

Minimum Order Quantity(MOQ)

1 Piece — Start with a Small Order to Evaluate Our Quality and Service Before Committing to Larger Purchases.

Lead Time & Shipping

Preparation Time: 3–5 Days After All Order Details Are Confirmed. Shipping Options: Sea Freight, Air Freight, or Express Courier. Transit Time Depends on the Selected Shipping Method and Destination.

Hardness

Pre-hardened (33–38 HRC / 300–355 HBW)

Key Composition

C: 0.35–0.45%, Cr: 1.8–2.1%, Ni: 0.9–1.2%, Mo: 0.2–0.4%

Reviews

There are no reviews yet.

Be the first to review “718H Pre-Hardened Steel Plate, Precision 6-Face Milled Precision CNC Machining & Wholesale Supply”

Your email address will not be published. Required fields are marked *

Scroll to Top